Guidons

Based on his incredibly popular 4-piece handlebar, we worked with WeThePeople pro, Felix Prangenberg, on a 2-piece version to allow him to switch it up from time to time. Using fully heat-treated and multiple-butted Japanese chromoly tubing, the new Pathfinder 2-piece bar feels just like the original 4-piece but with the classic 2-piece look and a lower weight. The Pathfinder 2-piece handlebar features an oval crosstube for improved strength and dent resistance. MATERIAL: - Full liquid post heat-treated 4130 "M2" crmo TUBING: - Multiple butted chromoly RISE: - 9" / 9.6" WIDTH: - 28" BACKSWEEP: - 11.5 degrees UPSWEEP: - 3 degrees SPECIAL FEATURES - "Pre-cut" to 28" - Oval crosstube for dent resistance and strength

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°

RIP, NO RATTLE. Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 35.0mm - Width: 800mm - Material (HB): Carbon - Rise (HB): 25mm - Type (bar): Riser - Backsweep (degrees): 9 - Upsweep (degree): 5

Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°

With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm - Material (HB): Carbon - Rise (HB): 20mm - Type (bar): Riser - Upsweep (degree): 5

It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm, 800mm - Material (HB): Carbon - Rise (HB: 25mm - Type (bar): Riser - Upsweep (degree): 5

- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°

- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos

- 12° moderately flared, medium width drop bar balances off-road performance, with on-road aerodynamics and comfort - Vibrocore foam core reduces transmission of harmful frequencies of vibration, and increases bar fatigue life and ultimate strength - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding stance and long days in the saddle on mixed terrain - 31.8mm bar clamp zone, and aerodynamic ergo top section enhances hand comfort over longer rides, without limiting range of rider/hand positions - 21.6mm inner diameter barends, allow use of most barend shifters - KEY TECHNOLOGIES: Vibrocore, On-Off Road Geometry - MATERIAL: Zirconium Doped 7-Series Alloy - WIDTH HOOD TO HOOD (c-c): 420 / 440 / 460mm - WIDTH BAREND to BAREND (o-o): 498 / 518 / 538mm - WEIGHT: 355 / 360 / 365g - DROP / REACH: 10mm / 65mm (all sizes) - BAR CLAMP / TOP SECTION: 31.8mm Ergo Profile - FLARE: 12° - RAMP: 14°

- DH and Freeride, ultra-wide, 820mm wide handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm Features: - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight: ±300g - Diameter: 35mm - Rise: 25mm - Length: 820mm - Geometry: 5° up x 8° back - Finish: Shot peen anodized, decal logos

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

- Handlebar optimized for 19mm diameter bar ends - Exclusively fits smaller grips for optimal ergonomics. - 650mm Bar - Offers ample width for increased bar control. - 6061 Sand Blasted Aluminum - Requires 22.2 Shim Kit (170915-01) - Rise: 20mm - Handlebar Width: 650mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Handlebar Weight: 260g

- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction

Profile's Largo bar uses double-butted 7075 aluminum to make a lightweight handlebar that maximizes stiffness for sprinting and climbing. A wider center clamping area easily accommodates clip-on aerobars and the extended reach means there's no compromise between an aerobar or in-the-drops position. The Largo is also shot peened and anodized for added strength and durability and offers excellent comfort due to its ergonomic bends.

Profile's Ozero Base Bar boasts superior aerodynamics thanks to its slippery hydroformed shape. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Ozero puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!

The deep aero wing section on Profile's full carbon Prosvet Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Prosvet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!

The aero wing section on Profile's full carbon Svet R Carbon Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!

The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No

The Svet V Base Bar features a low stack height and a deep drop, placing the rider in a low, aggressive steering position when out of the aerobars. - Multi-direction, multi-layer carbon fiber construction - Two-Way Fit System: Aggressive fit in standard position. Flip the base bar for a more elevated position - Straight Brake Extension: Help maintain control while remaining aerodynamic - Clean Cable Routing: Pre-slotted for internal cable routing. Di2 compatible. - 3:1 wing section with zero drop