Roues

The definition of "road cycling" now includes gravel and dirt as well as pavement. At the same time, bikes are evolving to meet the fit requirements of smaller riders. Meeting these two distinct needs was the driving force behind the Zipp 303 Firecrest 650B Tubeless Disc-brake wheelset. The smaller rim size provides room within frames and forks for larger tires that deliver increased comfort, compliance, and cornering performance. With more tire between the rim and the ground, the overall wheel diameter, including the tire, is similar to a standard 700c wheel and road tire combination. Back on the pavement, the 650B is a better-fitting wheel for smaller athletes riding compatible frames. For too long, many smaller cyclists have trained and raced on standard 700c wheels, losing out on the advantages of a proper fitting wheel such as improved handling and the elimination of front wheel-toe overlap. At the center of the 303 650B Firecrest Tubeless is a versatile and durable hubset, the German-engineered ZR1 DB. - Zipp graphics and cosmetic identity that scream speed - Versatile 45mm rim profile for increased speed and better cornering, control, and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - ZR1 DB hubset is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Built with Sapim CX Sprint J-bend spokes - Center Lock rotor interface (lockring included) - Ships with 12mm end caps

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

A strong, light, and durable carbon Boost road wheel with a 25mm inner width and Rapid Drive 108 hub that's perfect for higher-volume road and gravel tires. Aeolus Pro 3V is the ultimate road disc upgrade. It has a wider 25mm internal rim so you can run lower pressure for better tire support, added traction, better cornering, and a faster, more comfortable ride. Plus, a Rapid Drive 108 road hub with Boost 148 spacing adds snappy engagement for an all-around better, more confident ride. Product details - OCLV Pro Carbon offers an optimized blend of weight, strength, and durability - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - 25mm inner rim width (32mm outer) for added tire support to suit larger-volume road and gravel tires - Rapid Drive 108 road hubs provide quick engagement for faster acceleration and increased control - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Boost 148 wider hub flanges enhance bracing angle for stiffer wheel - No rider weight limit

The new SLR 1 50 Disc WheelSystem combines aerodynamic efficiency and minimized power loss in a lightweight package designed for versatile road performance. The SLR 1 50 features 50mm aero rim profiles for efficiency on the flats and a dynamic ride quality on hillier roads. Hookless rims with a broad inner width offer greater support for high-volume tires along with enhanced sidewall stiffness for better grip and cornering. FEATURES - Wind-tunnel-proven 50mm Hookless Aero Rim Profile provides a maximum aerodynamic advantage - High tensile strength carbon fiber is placed at only the most crucial points to provide optimal stiffness and class-leading weight - Hookless rim design saves weight and creates a broad 22.4mm inner rim width for increased actual tire contact patch, resulting in better traction and compliance - A thick rim bead of up to 3.8mm on each side enhances rim bead stiffness, offering increased support for better cornering - Dynamic Balanced Lacing (DBL) technology makes a stiffer, more efficient wheel as a wider hub flange increases spoke bracing angles for outstanding power transmission - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance and minimizing power loss SPECIFICATIONS - Tubeless: Giant Tubeless System (rim tape and valve kit included) - Suggested Tire Size: 700 x 25C – 700 x 32C - Rim Height: 50mm - ETRTO: 622-22 - Hub Compatibility: Shimano HG, SRAM XDR (XDR driver sold separately) - Bearing: Sealed Cartridge - Weight (Front): 703g

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

A durable Tubeless Ready mountain wheel with Rapid Drive 54 hub. Ready to rail on any trail With Line Comp 30, you'll feel the impact of wider rims on the quality of your ride. control. Product details - Rapid Drive 54 hub efficiently transfers effort into forward momentum - Wheels are upgradeable to 108 points of instant engagement - Tubeless Ready (TLR) rims allow for quick transition to tubeless system upgrade - 142x12 and 100x15 thru-axle spacing is convertible to 135x5 and 100x5 QR - Ultra-durable rim with 29mm internal, 34mm external width, 28 hole fr/r - Does not include skewer, reflector, rim strip, valve, or owner's manual

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheelset and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - Lifetime Warranty

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano HB-M475 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

Races, training, group rides, gran fondos—Profile’s 58/Twenty Four Full Carbon Clinchers will be your new secret weapon. Their engineers used fluid dynamic modeling and wind tunnel testing to create a super slippery 58mm-deep by 24.5mm-wide rim for maximum free speed and slicing right through head and cross winds. Adding mph are the Sapim CX-Ray bladed spokes, which have locking nipples so they stay tight. These wing-like wheels save you massive energy on the flats and they're also light enough to rocket you up the climbs. Plus, Profile's careful hand assembly and advanced carbon layup mean rock-solid stiffness for outstanding power transfer. And, because sometimes you just have to hit the brakes, Profile includes high-tech carbon wrapping and a heat-resistant resin in its rims, plus carbon-compatible brake pads come with the wheels so you'll have more stopping power than ever. Upgrade to the 58/Twenty Fours and get ready to become a better rider.

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type 12mm TA - Hub Spacing 197mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 94mm - Rim inner width range 45mm+ - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D202SB - Wheel Weight 1720g - Spoke Type Stainless Black - Valve Presta - Rim External Width - - Depth 20mm - Rim Model Evo JP96 - Skewers Included No

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

From road to gravel, the ULTEGRA RS770 supports wider tires for mixed surface and rough tarmac riding. The tubeless carbon laminate rims are complimented by CENTER LOCK disc brake hubs, providing confident braking in all conditions. Efficient acceleration - High drive rigidity - OPTBAL Lightweight and durable - Carbon laminate rim - Road tubeless Stability - Higher rigidity - Road E-THRU axle Easy maintenance and installation - Simple handling and workability - CENTER LOCK mount

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz

- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type 12mm TA - Hub Spacing 142mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body Shimano HG 11 - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 25mm - Rim inner width range 28-34.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D792SB-11 - Wheel Weight - - Spoke Type - - Valve Presta - Rim External Width 31mm - Depth - - Rim Model Sun Inferno 31 - Skewers Included No

A durable & classic 32H 700c road wheel with a new-school 18mm internal width rim. - Lightweight (485g) pinned construction low-profile double wall rim w/CNC machined sidewalls, wear indicator, and anodized matte black finish - Joytech alloy QR hubs w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black or silver) / 12mm brass nipples (silver) - 32H/3X lacing - Presta drilling - QR levers & high-pressure rim tape included - Not tubeless compatible - Weight: 989g

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Affordable and reliable 29'' / 700C disc brake wheels for entry-level hybrid, MTB and touring bikes - Black Alex Z1000 single wall rim offers great performance and look at a low price - Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes - Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front and 135mm rear axles for increased convenience - 36 stainless steel spokes and brass nipples for improved durability - TY505 rear hubs are compatible only with 7 speed cassettes only, while TX505 hubs are compatible with 8-10 speed and some 11 or 12 speed cassettes. See "Documents and links" for more details on compatibility.

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Shimano FH-MT400 (Black), Shimano logo, 12mm E-THRU, O.L.D. 142mm - Rear hub (2): Shimano FH-MT4050 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Rear Quick Release binder included (FH-MT4050) - E-THRU Axles not included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- TSE design with 23mm internal width with tubeless and hookless rim profile ideal for wider tires at lower tire pressure - Minimum 25mm tire width - More than 300 g lighter than previous model - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - An all-out aero 80mm rim profile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Center locking rotor interface. Lockring is included - Lifetime warranty

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

Zipp's 303 Firecrest Tubeless rim brake wheels offer all-around performance for a new era of road riding. They're rich in heritage yet loaded with innovations; as adept in the mountains as on rolling hills, windswept farm lanes, or ferocious field sprints. At Zipp, we never rest on laurels. These wheels feature a 19mm internal width and are tubeless ready. That means you can run lower tire pressure for greater cornering grip and compliance while still benefiting from reduced rolling resistance and without the risk of pinch flats. When it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. They're lightweight and feature ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level NSW wheel lineup. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance. The ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. Lastly, at the center of the 303 Firecrest Tubeless rim-brake is a new versatile and durable hub, the German-engineered ZR1. - Tubeless for secure performance even when ridden at lower tire pressures - New ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Versatile 45mm rim profile that's fast, stable, and versatile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Showstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps, quick release skewers

A clever dual-duty wheel with MTB hub spacing that can be used with either rim or 6-Bolt disc brakes. - Alex Y303 pinned construction single-wall rim with generous 24mm internal width and machined sidewall (anodized black for clean looks when used with disc brakes) - Joytech 6-Bolt disc nutted alloy hubs w/serviceable cup-and-cone bearings - Anodized brake track for clean looks when used with a disc brakes - Thread-on freewheel fitting (7/8/9/10sp compatible) - Plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1097g

An affordable and clever dual-duty rim and disc brake compatible 26-inch wheelset that combines MTB hub spacing with screw-on freewheel compatibility for a wheelset that's perfectly suited to trekking, MTB, and urban use. - Alex Rims Z1000 pinned construction single-wall rim with 20mm internal width suitable for a wide range of tire widths & brushed sidewall - Joytech 6-Bolt disc alloy nutted hub w/serviceable cup and cone bearings - Anodized brake track for clean looks when used with a disc brakes - Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1064g

An affordable freewheel-compatible wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 27-inch (630mm ISO) wheel size. - Compatible with both 27 x 1-1/4 and 27 x 1-3/8 tires (same ETRTO - 630mm) - Alex Rims AP18 pinned construction classic box-section single-wall rim brushed sidewalls a generous 18mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (6/7sp compatible) — axle can be respaced for 5sp compatibility - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1313g

A tough, no-nonsense workhorse 29/700c rim brake wheel that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1035g

A tough, no-nonsense workhorse 29/700c rim brake wheel with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1141g