Pièces et accessoires

- Women's HairPort FSL II

When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water-resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others. Technical Details: - Fabric : Polyurethane-coated Carbon WR spandex - Seams: Sealed seams: Keep you dry - Visibility Features: Reflective accent

The weather forecast won't deter you from riding when you've got Endura's Luminite Helmet Cover packed away. Its waterproof, fully seam-sealed, and emblazoned with reflective safety chevrons. Plus there's a removable Luminite LED light so you're extra visible to other commuters.

Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new. - Original replacement fit systems for your Bontrager helmet - Compatible with all Bontrager helmets with Headmaster I or II fit systems

Key features - Original replacement Boa System for your Bontrager Velocis MIPS helmet - Not compatible with any helmets except the Bontrager Velocis MIPS with the Boa System

Add the safety of visibility to your helmet and light up the trail, road, or commute with help from the Bontrager Helmet Mount. Easily attaches a light to most helmets. - Works with all Bontrager Ion and Flare lights

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Solstice or Starvos helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

For added protection in aggressive terrain, you have the option to add this removable, lock-on Super 3R chin bar to your Bell Super 3 Helmet (sold separately).

EPR Cheek Pad Replacement Set for Xact Helmet

EPR Cheek Pad Replacement Set for Xult Helmet

- Mud and splash protected - Foam padding for additional protection - Simple to access - Can be attached to backpack

Replace the worn out or broken chin bucket on your iXS Trail RS helmet with this replacement buckle. It's easy to install so you'll be back out on the trail in no time.

Replace the original pads on your iXS Trail RS helmet with this pad kit. The kit works for all sizes of helmets.

Easily replace the original visor on your iXS Trail RS helmet with this visor. Just bolt it on.

Spare visor and bolts for Trail XC helmet

Spare visor for Trigger AM helmet, including pins

Spare visor and bolts for Trigger FF helmet

Cheek Pad kit for Xact helmet Size SM & ML, 15 & 25mm thickness

Freshen up your iXS Xact helmet with this replacement liner.

Replacement visor and pins for the iXS Xact helmet.

Spare cheek pads set for Xult DH helmet

Head lining for Xult DH helmet

Spare visor and bolts for Xult DH helmet

Freshen up your iXS Xult helmet with this lining replacement.

- Replacement padding for Kickstart and Kickstart Lite

- Replacement padding for Lumos Matrix and Street helmets

Handlebar mount for Lumos remote

A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate